Versalift VST-40-MHI, 2022 Chevy 5500 4x4

Versalift VST-40-MHI equipped as follows:

• Insulated
• 45 ft working height
• Platform capacity of 400 lbs
• Side mounted closed heavy-duty one-step 24” X 30” X 42” fiberglass platform including platform liner and vinyl cover
• VERSALIFT TruGuard™ dielectric isolating system with right hand single-stick control. All control handles are isolated and tested per ANSI 92.2. The high resistive dielectric system is protected from direct environmental and job related contamination. TruGuard™ technology incorporates the use of full hydraulic controls with durable metal handles and linkages
• Hydraulic dual arm articulating jib pole and winch package for up to 1,000 lbs. capacity, including insulated jib pole
• Side mounted telescopic upper boom allows low stowing of platform. Fiberglass inner boom and patented ELECTROGARD provide insulation gap of 46” fully retracted meeting ANSI A92.2 requirements for Category C 46KV and below
• 360° continuous rotation including slip rings
• Individual full pressure controls at the turret actuate all boom functions and is equipped with a selector valve to override upper controls
• Six GPM (22.7 lpm) open center hydraulic system with a 3000 psi (210 kg/cm²) operating pressure
• Chassis insulating system (fiberglass lower boom insert) providing 12” insulation gap and including accommodations to bridge insulation gap for testing per ANSI 92.2
• ELECTROGARD and inner boom finished with white urethane paint over a white gel coat
• Integral reservoir with a 17-gallon (64.4 l) capacity and dual sight gauges
• Non-lube bearings used throughout
• Automatic throttle control
• 12 Volt DC backup pump providing power to all boom functions
• Sub frame mounted main A-frame outriggers with pivot feet, two control valves, and a selector valve
• Outrigger boom interlock system for main outriggers
• Auto boom latch for mounting on outer boom ELECTROGARD. The rotary auto boom latch works off the lift hydraulic pressure to open and close
• Safety harness and lanyard
• Standard white urethane paint

Brand FX body equipped as follows:

• 132” X 42” X 94” service body
• 30 inch aluminum tread plate platform extension
• BFX LED lighting package installed in tail shelf
• Cable access step at rear and side access
• Two (2) stainless steel grab handles at side access and two (2) aluminum grab rails at rear tail shelf
• Wheel chock storage and outrigger pad holders
• Push/pull rod lock system
• 42” High Street side compartments as follows
  • 1st Vertical: Two (2) adjustable shelves with dividers with outrigger cutout
  • 2nd Vertical: Two (2) adjustable shelves with dividers
  • Horizontal: One (1) removable shelf with dividers
  • Rear Vertical: Two (2) adjustable shelves with dividers
• 42” High Curbside compartments as follows
  • 1st Vertical: Two (2) adjustable shelves with dividers with outrigger cutout
  • 2nd Vertical: Grip strut access steps to bed area with removable plastic tail board
  • Horizontal: One (1) adjustable shelf with dividers
  • Rear Vertical: Five (5) fixed material hooks 1-3-1

MOUNTED ON:

2022 Chevy 5500 4x4 equipped as follows:

• 19,500 lbs GVWR
• 6.6L Duramax V8 Turbo diesel engine
• 6-speed Allison A1700RDS automatic transmission
• Front axle – 7,500 lb, multi-leaf suspension
• Rear axle – 15,500 lb multi-leaf suspension
• 110-volt AC power outlet
• 1300 cold-cranking amps heavy-duty dual batteries
• Air conditioning
• Engine block heater
• 225/70Rx19.5G all traction tires.
• AM/FM stereo with Bluetooth USB port, and auxiliary jack
• 40/20/40 split vinyl bench seat
• Back up camera
• Transfer case skid plate shield
• Painted Summit White