Palfinger PK11.001, 2019 International 4300 SBA 4x2

Palfinger PK11.001 SLD 3 Hydraulic Loader equipped as follows:

• Mounted behind cab
• Maximum lifting moment 74,780 ft/lbs
• 2-section hydraulic boom extension to 25’6”
• Manually extendable outriggers with a spread of 16’0”
• Paltronic Overload Protection System
• Single linkage at outer boom
• Rotation angle 400 degrees
• 4-function Danfoss control valve
• Dual operator control stations
• Bubble level at both outrigger control stations
• Load holding valves on main, outer and extension cylinders
• Return oil utilization
• Oil tank 17.2 US gallons mounted at crane base with return filter
• Two composite outrigger pads with storage brackets
• 180 degree stable over rear

12’ Alum-line body equipped as follows:

• 12’ flatbed
• 3” extruded aluminum I-beam crossmembers on 12” centers
• Extruded aluminum perimeter bed rail – ½” thing
• Upgraded to 1-1/4” extruded floor
• In-frame storage box 10’ between frame truck rails with rear doors
• 3” x 3/8” rub rail and 2/4 stake pockets
• 6” deep rear diamond plate step bumper
• 20” deep side skirt, 0.125” diamond plate material
• Underbody alum. Diamond plate toolboxes: 60”L x 20”H x 24”D – 1 each side

2019 International 4300 SBA 4x2 chassis equipped as follows:

• 25,500 GVW
• Cummins B6.7 engine – 250 hp @ 2400 rpm, 660 lb-ft at 1600 rpm
• Engine block heater
• Allisson automatic transmission
• Hydraulic brakes
• 50 gallon fuel tank
• Gear ratio 3.36
• Rear suspension – single spring 18,500# with 4500# aux rubber spring
• Driver’s seat – air suspension, high back, vinyl
• Passenger’s seat – non suspension, high back, vinyl
• Steel wheels – 19.5x6.75
• Tires – 245/70R19.5