Palfinger PK 7.001 SLD3, 2024 Ford F600

Palfinger PK 7.001 SLD3 equipped as follows:

• Mounted back of cab
• Maximum lifting moment 6.2mt (44,550 ft-lb)
• 4 section hydraulic boom to 36’ 9”
• Maximum lifting capacities
• 12’- 3,300 lb
• 18’- 2,100 lb
• 24’- 1,480 lb
• 30’- 1,140 lb
• 36’- 930 lb
• Rotation angle 400 degrees
• Single linkage at outer boom
• Single operator control station
• Scanreno radio remote control with 4 section control valve LED load display, 32’ 9” backup cable, battery charger, 2 batteries, and hip and neck strap
• Paltronic overload protection system
• R3X hydraulically extendable telescopic outriggers with a spread of 16’ 10”
• Two PVC outrigger shoes and storage brackets
• Oil tank – 13.2 gallons
• 11.5 hp oil cooler
• Load holding values on main, outer, slewing, and extension cylinders
• Return oil utilization – increases speed of extension cylinder and allows
  crane to work faster and more efficiently 
• KTL Paint Process – the cathodic dip painting – Shot blasted crane parts are covered in zinc phosphate in an immersion process and coated electro-statically two component top coating of paint provides superior surface protection. Painted Traffic Red
• 10’ Tafco aluminum bed with wood floor, underbody tie down rails, and rub rails
• 42” bulkhead
• 57”x24”x96” straight side, diamond treadplate, aluminum crossbody toolbox
• 2000 watt Vanner inverter with dual batteries. Mounted in toolbox.
• 50 gallon water tank

MOUNTED ON:

2024 Ford F600 4x4 equipped as follows:

• 22,000 GVWR
• 6.7L 4V OHV Power Stroke V8 Turbo-Diesel B20 – 330 HP @ 2200 RPM,
  950 lb/ft torque @ 1800 RPM
• TorqShift 10-speed automatic transmission
• Engine block heater
• Front and rear 19.5” argent steel wheels
• Tires – 245/70Rx19.5G
• Front axle 7,500lbs
• Rear axles 15,500lbs
• 193” wheelbase
• 4-wheel ABS brakes
• Chrome bumper
• 40-gallon fuel tank
• AM/FM stereo with SYNC System
• Power windows and locks with keyless entry
• 40/20/40 split bench seat- vinyl
• Back up camera
• Color white