Stellar 8630 Service Crane, TMAX1-13 Aluminum Body, Ford F600

Stellar TMAX1-13 Aluminum Mechanic Body equipped as follows:

• Aluminum doors and side packs
• Torsion box understructure with isolated, steel crane compartment
• Master-Lock system
• 157” long
• Six (6) recessed cargo tie-downs
• Two (2) rear mounted grab handles
• 12” fold down tailgate – painted black
• 21” work bench bumper with thru compartment
• Rubber fenderettes
• All compartments raised to 52” H
• Overlapped doors on SS1V/CS1V and horizontal compartments
• 2- & 3-point stainless steel compression latches
• Stainless steel “Billet Style” hinges
• Spring loaded door stops
• Dual-seal automotive type compartment weather seal
• SS1VF – Heavy duty aluminum drawer set – 35.5”H x 34”W x 18”D, 3-3”, 3-5”, 1-7”
• SS1VR – Shelf with (3) dividers
• SS Horizontal – Heavy duty aluminum drawer set – 3-3”
• SS Rear – Shelf with (3) dividers
• CS1V – 2 bottle oxy-acet holder
• CS2V – Shelf with (3) dividers
• CS3V – Shelf with (3) dividers
• CS Horizontal – Shelf with 3 dividers
• CS Rear – ½” x 50’ hose reel with roller guide – exits rear of body
• Stellar 40P hydraulic driven air compressor – produces 40 CFM at 100 psi, 2-cylinder, single stage compressor, direct drive coupling, oil cooler, fan, and hydraulic motor
• 25-gallon air tank kit (1 10-gallon, 1 15-gallon)
• FLR system – (filter, lubricator, regulator)
• Backup alarm
• ICC safety kit – 2.5# fire extinguisher and reflector kit
• Weld-on receiver hitch
• Spray-on bed liner for load bed walls and floors, and workbench
• Undercoated
• Prime painted white

Stellar 8630 telescopic crane equipped as follows:

• 53,100 ft/lb rated when in boost mode
• 8,600# maximum capacity at 6’2” radius
• 29’8” maximum hydraulic reach
• Boom elevation: -10° to +80°
• 400° non-continuous rotation – durable enclosed rotation system with a cast iron base and an internal mechanical stop
• Planetary winch with 120’ of 3/8” wire rope
• Max line pull speed 60ft/min
• Quick release snatch block stow
• CDTpro Control System. The most advanced crane remote ever. Save time by knowing your crane can lift the load before you set up. The innovative, industry-only Range Finder technology provides real-time max lifting capacity from any point around the crane
• On-Demand speed control ramps engine RPM up only when the crane is being used. When crane is not used for 5 seconds engine RPM returns to idle. This lowers fuel consumption and reduces noise pollution in the work area
• Greasable pivot bushings, each pivot pin location includes bushings and grease zerks to provide for years of use
• Hydraulic stabilizers

MOUNTED ON:

Ford F600 equipped as follows:

• 6.7L diesel engine
• 10-speed automatic transmission
• Cruise control
• Air conditioning
• Power group
• 40/20/40 split vinyl bench seat
• Backup camera

STOCK PHOTOS