Stellar 8630 Service Crane, KMT1-11, Ford F550 Super Cab

Knapheide KMT1-11 Mechanic Body equipped as follows:

• A-40 galvanneal compartments and doors
• Torq-isolator crane support system
• 3/16” treadplate floor
• Master-Lock system
• Six (6) recessed cargo tie-downs
• Two (2) rear mounted grab handles
• 16” high double panel slam tailgate with center latch
• 21” work surface bumper and 2.5” receiver tube
• Vise mounting plate – receiver workbench mount
• Grip-strut flex steps
• LED compartment lights
• SS1VF – 7 drawer unit – 3-3” drawers, 3-5” drawers, and 1-7” drawer
• SS2V – Two (2) adjustable divider shelves with (4) dividers each
• SS Horizontal – Bolt bin storage unit
• SS Rear – Two (2) adjustable divider shelves with (4) dividers each
• CS1V – Divider kit with shelves. Oxy-Acetylene bottle holder holds 2 bottles
• CS2V – Two (2) adjustable divider shelves with (4) dividers each
• CS Horizontal – Divider shelf with (8) dividers
• CS Rear – Fixed shelf and ½” x 50’ hose reel with roller guide exits rear of body
• Boss 40 CFM hydraulic compressor with Reelcraft 50’ x ½” hose reel and roller lead through the right rear compartment
• FLR system
• LED floodlights – Four (4) total
• Welder bracket – installed street side on top of rear side pack
• Strobe system (2) LED amber strobe lights installed on front grill
• Backup alarm
• ICC safety kit
• Knapliner – spray on bed liner applied to cargo floor, sides, compartment tops, bulkhead, tailgate, rear bumper, and front end panels
• Undercoated
• Prime painted white

Stellar 8630 telescopic crane equipped as follows:

• 53,100 ft/lb rated when in boost mode
• 8,600# maximum capacity at 5’10’ radius
• 30’ maximum hydraulic reach
• Boom elevation: -10° to +80°
• 400° non-continuous rotation – durable enclosed rotation system with a cast iron base and an internal mechanical stop
• Planetary winch with 100’ of 3/8” wire rope
• Max line pull speed 60ft/min
• Quick release snatch block stow
• Adjustable boom support, roller rest
• Proportional radio remote control – LCD features real time load capacity, maximum distance with the current load, boom angle, and percentage of load
• CDTpro Control System. The most advanced crane remote ever. Save time by knowing your crane can lift the load before you set up. The innovative, industry-only Range Finder technology provides real-time max lifting capacity from any point around the crane
• On-Demand speed control ramps engine RPM up only when the crane is being used. When crane is not used for 5 seconds engine RPM returns to idle. This lowers fuel consumption and reduces noise pollution in the work area
• Greasable pivot bushings, each pivot pin location includes bushings and grease zerks to provide for years of use
• Hydraulic stabilizers

2024 Ford F550 Super Cab 4x4 equipped as follows:

• 19,500# GVWR
• 6.7L Power Stroke V8 diesel engine
• Engine block heater
• 10-speed automatic transmission
• Cruise control
• Air conditioning
• Power doors
• Power windows
• AM/FM radio with Bluetooth
• Backup camera