Stellar 12621 Service Crane, TMAX2-11 Aluminum Body, 2025 Freightliner M2-106

Stellar TMAX2-11 Aluminum Mechanic Body equipped as follows:

• Aluminum doors and side packs
• Torsion box understructure with isolated steel crane compartment
• Master-Lock system
• 133” long
• 50” loadbed width
• Six (6) recessed cargo tie-downs
• Two (2) rear mounted grab handles
• 12” aluminum fold down tailgate – painted black
• 21” step bumper with thru compartment
• Vise mounting plate – receiver workbench mount
• Step, slide out for TMAX mechanics work bench bumper
• Rubber fenderettes
• All compartments raised to 60” H
• Overlapped doors on SS1V/CS1V and horizontal compartments
• 2- & 3-point stainless steel compression latches
• Stainless steel “Billet Style” hinges
• Spring loaded door stops
• Dual-seal automotive type compartment weather seal
• LED compartment lights
• SS1VF – Heavy duty aluminum drawer set – 43”H x 34” W x 18” D – 8-3”, 2-5”, 1-7”
• SS1VR – Shelf with 3 dividers – 17.63” W x 19” D
• SS Horizontal – Heavy duty aluminum drawer set, 11” H x 48” W x 18” D, 3-3”
• SS Rear – Shelf with 3 dividers – 24” W x 19” D
• CS1V – Divider kit with shelves and Oxy-Acetylene bottle holder holds 2 bottles
• CS2V – One (1) shelf with (3) dividers – 21” W x 19” D
• CS Horizontal – Shelf with 3 dividers – 52” W x 19” D
• CS Rear – ½” x 50’ hose reel with roller guide – exits rear of body
• Cab guard
• 22-gallon air tanks
• FLR system – 1 outlet for air hose (filter, lubricator, regulator)
• LED floodlights – Four (4) total. 1 on boom support, 1 SS behind compressor, 1 on each rear taillight box
• Backup alarm
• ICC safety kit – 2.5 lb fire extinguisher and reflector kit
• Adjustable boom support, roller rest
• Weld-on receiver hitch
• Spray-on bed liner for load bed walls and floors
• Undercoated
• Aluminum rock guard kit
• Prime painted white
• Stellar 46P hydraulic driven air compressor – 46 CFM @ 175 PSI, 4 cylinder 2 stage compressor, direct drive coupling, oil cooler, fan, and hydraulic motor

Stellar 12621 telescopic crane equipped as follows:

• 77,800 ft/lb rated when in boost mode
• 12,000 lb maximum capacity at 5.5’ radius when in boost mode
• 21’ maximum hydraulic reach
• Octagonal boom – Same strength as hexagonal boom with less weight
• Boom elevation: -10° to +80°
• 400° non-continuous rotation – durable enclosed rotation system with a cast iron base and an internal mechanical stop
• Planetary winch with 100’ of 7/16” wire rope
• Max line pull speed 55ft/min
• Quick release stow hook
• Proportional radio remote control – LCD features real time load capacity, maximum distance with the current load, boom angle, and percentage of load
• CDTpro boost mode allows for a momentary 18% increase in the capacity of the crane, and a Safe Mode to keep the crane and operator safe should a load indicating device fail to operate correctly
• On-Demand speed control ramps engine RPM up only when the crane is being used. When crane is not used for 5 seconds engine RPM returns to idle. This lowers fuel consumption and reduces noise pollution in the work area
• Greasable pivot bushings, each pivot pin location includes bushings and grease zerks to provide for years of use
• Dual LED Trilliant lights - mounted on boom tip – gravity rotating
• Hydraulic stabilizers

MOUNTED ON:

2025 Freightliner M2-106 equipped as follows:

• 26,000# GVW
• Cummins L9 330 HP
• Allison 3500 RDS Automatic transmission
• Front axle: 10,000#
• Rear axle: 21,000#
• Air brakes
• Air suspension
• Horizontal exhaust
• 50 gallon LH fuel tank
• 22.5 tires